Raloy RN117 - Manual (Page 14)

14
www.raloy.com
1.16 RN117 / 119 (Single console)
 Use RCE-6 to connect to server via USB interface
Figure 11. Example of connecting RCE-6 4-in-1 Combo KVM cable to server via USB interface
1.17 RN117 / 119 (Single console)
 Use RCE-6 to connect to KVM via USB interface
Figure 12. Example of connecting RCE-6 4-in-1 Combo KVM cable to KVM via USB interface
Remarks:
 The above connection is only for the LCD keyboard without KVM switch built-in.
 For the LCD keyboard drawer with KVM switch built-in, please refer to attached KVM switch user manual.
Caution: The LCD keyboard drawer is hot-pluggable, but components of connected devices, such as the servers
and KVM switch, may not be hot-pluggable. Plugging and unplugging cables while servers and KVM are powered
on may cause irreversible damage to the servers, KVM and LCD keyboard drawer. Before attempting to connect
anything to the LCD keyboard drawer, we suggest turning off the power to all devices before connecting them.
Apply power to connected devices again only after the LCD keyboard is receiving power. The company is not
responsible for damage caused in this way.