2 on-screen display operation (osd), Osd configuration page – Raloy RNX119 User Manual
Page 10
7
All LED touch buttons in WHITE light.
The LED of Power touch button will flash continuously when there is no signal input.
Exit the OSD screen. Go back to the previous on-screen sub-menu or
main menu
Scroll through menu options and adjust the displayed control
Display the OSD menu. Press Enter key to select screen
Turn the monitor on or off
Membrane Switch
Function
Note:
1. All LED touch buttons turn off after 10 minutes of idle status (except the Power ).
2. Light up all membrane buttons, please press any button for 1-2 seconds (except the Power ).
3-2 On-screen Display Operation (OSD)
OSD Configuration Page
Image:
for the brightness, contrast, color temp, red, green, and blue
Geometry:
for the auto adjust, H position, V position, phase and clock
Video:
for the colour, tint, sharpness, noise reduction, DCDi and TV Setup
Audio:
for volume, bass, treble, balance, AVL and mute
Misc:
for the language, OSD position, graphic mode, ratio, reset and timer