Raloy Basic KVM - Manual (Page 12)

9
The password is enabled by default. The default password is “00000000” (Do not use “0” on number pad)
■ Enable password
1. Press the KVM hotkey Scroll Lock + Scroll Lock + U
2. Logout of the KVM by pressing the hotkey Scroll Lock + Scroll Lock + P
3. In SUPERVISOR level, enter “00000000” in both the user name & password fields (Do not use “0” on
number pad)
4. In USER level, press Space bar + Enter in user name & password field
5. Note: The system will automatically logout after 10 minutes of inactivity
3-2 Password
■ Set your own user name & password
1. Login to the KVM on the SUPERVISOR level by entering “00000000” in user name & password fields
2. Open KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar
3. Press F1 to access the MAIN MENU
4. Select “USER SECURITY”
5. Set password in SUPERVISOR & USER level
a. In the left-top row “S” (SUPERVISOR), press Enter to set your own user name & password
b. In the row 1 to 8 (USER), press Enter to set your own user name & password
6. Press Enter to save the new password setting or press Esc to cancel the editing without saving changes
a. Note: Blank has underscore, while SPACE doesn’t have one
b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid character
■ Change your password
1. Login to the KVM in SUPERVISOR level by entering your user name & password
2. Open KVM OSD menu by pressing the KVM hotkey Scroll Lock + Scroll Lock + Space Bar
3. Press F1 to access the MAIN MENU
4. Select “USER SECURITY”
5. Change password in SUPERVISOR & USER level
a. In the left-top row “S” (SUPERVISOR), press Enter to change your user name & password
b. In the row 1 to 8 (USER), press Enter to change your user name & password
6. Press Enter to save the new password setting or press Esc to cancel the editing without saving changes
a. Note: Blank has underscore, while SPACE doesn’t have
b. Press any alphanumeric key to move to next input item. SPACE is treated as a valid character
■ Disable your password
1. Press the KVM hotkey Scroll Lock + Scroll Lock + U
2. Logout of the KVM by pressing the KVM hotkey Scroll Lock + Scroll Lock + P
3. You don’t need user name & password to access the KVM OSD menu
■ Forgot your password
Please contact your supplier for further support
Please Note:
■ You must press the KVM hotkey within 2 seconds
■ A beep sound will be heard upon pressing KVM hotkey