REFCO Powermax - Manual (Page 2)

(2) YEAR LIMITED WARRANTY
I.T.S. Thermaflo promises to the owner to repair or, at Thermaflo’s option, to replace any part of the
PowerMax which proves to be defective in workmanship or material under normal use for a period of two
(2) years from date of sale. During this period, Thermaflo will provide all parts and labor necessary to
correct such defects, free of charge.
EXCLUSIONS: 1) Motor: The compressor motor has a (1) year unlimited warranty.
2) Filtering: If during the warranty evaluation it is determined that an
external filter was not used during the operation of the unit, Thermaflo
reserves the right to void the warranty.
In no event will Thermaflo be liable for incidental or consequential damages, or for damages resulting
from external causes such as abuse, misuse, incorrect voltages or acts of God. This warranty does not
cover service calls which do not involve defective workmanship or materials. This warranty gives you
specific rights, and may also have other rights which vary by state.
FOR WARRANTY / NON-WARRANTY REPAIR SERVICE:
1) Call (800) 848-4232 Thermaflo Customer Service. Have model and serial number ready.
2) Thermaflo will then issue a Return Authorization Number (R.A.#) for the repair.
ALL RETURNS MUST HAVE AN R.A. NUMBER PRIOR TO SHIPPING.
3) Ship the product prepaid to:
I.T.S. Thermaflo Repair Dept.
409 Lake Ave.
Bristol, CT 06010
8
Dear Customer:
I.T.S. Thermaflo would like to thank you for selecting the OZ-PowerMax Recovery
System. Your PowerMax recovery unit, like all THERMAFLO products, has gone
though extensive testing to assure the highest degree of quality. THERMAFLO
backs up this claim of quality with a comprehensive service program and a full
warranty. The people at THERMAFLO have put a great deal of time, effort and
pride in producing this product. We believe that our continued diligence will insure
better products, services and satisfied customers.
Thanks again for your confidence in THERMAFLO!
THERMAFLO a division of Industrial Tool Solutions
Customer Service # 800-848-4232 M-F 9am to 5pm EST.
Fax # (413) 733-9267
SAFETY CONSIDERATION
PRESSURIZED containers or overfilled containers may cause violent explosions and possible injury or
death. Use only D.O.T. approved refillable refrigerant containers. Federal regulations require refrigerants
to be transported in containers meeting D.O.T. specs 4BW or 4BA.
HOSES may contain refrigerant under pressure. Contact with refrigerant may cause injury. Wear
protective equipment. Disconnect hoses with extreme caution.
HIGH VOLTAGE electricity is present inside cabinet. Disconnect power before servicing.
USE only with refrigerants 12, 22, 500, 502, 134a 410a and blends with similar pressures.
THIS equipment is for use by qualified and trained personnel only. Operators must be familiar with
refrigerants and the dangers of pressurized containers.
HELPFUL HINTS
· Always close inlet (V1) before closing discharge (V3).
· If unit starts to “chug”, throttle down inlet (V1).
· If discharge pressure starts to rise, subcool the recovery tank.
· Never turn the recover/self-evac (V2) while unit is running.
· Always purge your hoses and recovery tank of non-condensables.
· Always use an inlet filter (part # ALF-032).
· Always weigh your recovery tank with a scale while using the test plug.
· Maintain an inlet pressure below 90 psig. during long-term vapor recovery.
· While subcooling, maintain 100-200 psi higher discharge pressure than the
recovery tank’s pressure.
1