Application – REFCO DIGIMON4 User Manual
Page 9
Instruction Manual DIGIMON-SE / DIGIMON4
English
7
Application
Set-up
Insert 4 batteries in the battery compartment at the back of the device.
Caution:
Ensure the batteries are inserted observing the correct
polarities. Do not leave empty batteries in the battery
compartment. If you will not be using the DIGIMON for a
longer period of time, remove the batteries from the battery
compartment.
Press the
button, the device is now switched on.
Check battery charge level indicator.
Illuminating the display
Press the
button to switch the display light on or off. The light switches off
automatically after 1 minute.
Automatic shut-off
The DIGIMON switches off automatically approximately 15 minutes after the last
measurement or after the last button has been pressed.
Resetting pressure sensors
By pressing the
and
buttons the DIGIMON pressure displays are
reset to zero, in order to avoid incorrect measurement values.
Important note:
Depressurise the DIGIMON (remove hoses).
Open the blue and red valves.
To obtain a correct measurement value on the display, the DIGIMON
should not be reset when pressurised or under a vacuum.
LIGHT
SET
LIGHT
ON/OFF