Rigel Systems GSO Crayford Linear Focus Motor User Manual

Gso lf focus motor installation

Advertising
background image

GSO LF Focus Motor Installation

Step 1: Remove single speed focus knob
using supplied allen wrench.

Step 2: Remove plastic spacer from focuser
shaft and set aside for later. DO NOT SKIP
THIS STEP.

Step 3: Press gear onto knob shaft until
presses on knob. You may want to press
around the inside edge of gear with a
screwdriver so the gear is completely flush
against knob.

Step 4: Reattach single speed focus knob
using supplied allen wrench.

Step 5: Remove 4 allen screws holding
focuser gearing body from focuser using
supplied allen wrench..

Step 6: Press 4 standoffs into screw head
detents as shown. Use long ones for 2”
focuser, short ones for 3.3” focuser

Step 7: Place motor bracket on standoffs

and insert long allen screws through holes
and brackets and standoffs and focuers
gearing body.

Step 8: Attach focuser shaft body to focuser

using 4 long allen screws and supplied allen
wrench. Be sure to loosen the center tension
thumb knob before tightening the allen
screws.

Step 9: Remove single speed knob using

supplied allen wrench.

Step 10: Slip plastic spacer onto focuser
shaft.

Step 11: Reattach single speed focus knob
using supplied allen wrench.

Step 12: Plug motor into controller and
tighten red thumb screws to engage motor.
Loosen red thumb screws for manual

focusing.

5 Year limited warranty: Rigel Systems, 26850 Basswood Ave, Rancho Palos Verdes CA, 90275 warrants to the original consumer purchaser of its product that the product will be
free of defects in material or workmanship 5 years from the date of purchase under normal use.During this warranty period, Rigel Systems will, at its option, repair or replace the

product without charge for parts or labor when delivered to Rigel Systems with proof of the date of purchase and a statement of the problem with the product. Shipping and handling
charges to Rigel Systems are your responsibility. This warranty does not apply if the product has been altered or repaired by anyone other than Rigel Systems or has been subjected

to purchaser abuse, accident, negligence or damage subsequent to purchase including battery damage to product. This warranty excludes incidental or consequential damages
resulting from the product or use of the product. The product is not a toy. Keep away from children.

Advertising