Rigel Systems UO Crayford Focus Motor - Manual

UO Focus Motor Installation
Step 1: Remove focus knob Step 2: Press white plastic gear onto
focus knob shaft all the way. Step 3: Remove 2 button head
screws next to focuser shaft.
Step 4: Attach mounting plate and
stepper motor using 2 longer button
head screws (supplied) Step 5: Reattach focus knob to shaft Step 6: Tighten two red thumb
screws to mesh motor and focuser
gears.
Step 7: Plug motor into Stepper
Controller and you’re ready to run!
For manual operation, Loosen red
head thumb screws to uncouple
motor gear from focuser knob gear. 5 Year limited warranty: Rigel Systems, 26850 Basswood Ave, Rancho Palos
Verdes CA, 90275 warrants to the original consumer purchaser of its product that
the product will be free of defects in material or workmanship 5 years from the date
of purchase under normal use.During this warranty period, Rigel Systems will, at
its option, repair or replace the product without charge for parts or labor when
delivered to Rigel Systems with proof of the date of purchase and a statement of
the problem with the product. Shipping and handling charges to Rigel Systems
are your responsibility. This warranty does not apply if the product has been
altered or repaired by anyone other than Rigel Systems or has been subjected to
purchaser abuse, accident, negligence or damage subsequent to purchase
including battery damage to product. This warranty excludes incidental or
consequential damages resulting from the product or use of the product. The
product is not a toy. Keep away from children.