Rigel Systems usb-nFOCUS - Manual

usb-nFOCUS Instructions
Copyright Rigel Systems 2010 Page 1 of 3 www.rigelsys.com
Hardware Connection
1) DC motor cable plugs into nFOCUS
2) nFOCUS connects to usb-nFOCUS using supplied curly telephone cable.
3) usb-nFOCUS connects to PC usb port using supplied usb cable
4) Optional temperature probe plugs into 2.5mm jack next to telephone connector
socket on usb-nFOCUS.
BEFORE INSTALLING SOFTWARE
Make sure that your windows account has ADMIN privilege
as ADMIN privilege is required to install drivers in Windows
Installation
1) Download and install the ASCOM platform from
http://ascom-standards.org/index.htm
2) Go to http://www.astrogene1000.com/products/gcusb_nfocus/gcusb_nfocus.htm
3) Download “INNO Based installer GC-USB-nFOCUS ASCOM Driver”
4) Double click on the “GCUSB_nFOCUS Setup.exe” in the download screen and run the exe