Rocktron MIDI Xchange - Manual (Page 16)

MIDI Xchange Operation - Power Sources
The MIDI XChange is unique in respect that you may use most
any type of power.
9-VOLT BATTERY
The MIDI XChange is supplied with a 9Volt Battery - please see
“9-VOLT BATTERY COMPARTMENT” section on how to
change the battery. Before operation you will need to open the
battery compartment and plug in the 9-Volt battery packaged in the
compartment. Expected battery life is 12 hours under constant
operation.
EXTERNAL ADAPTER - *Not Included
The MIDI XChange can also run off the following adapters:
1) 9VDC 100ma adapter (5.5/2.55mm Coax Plug - Outer ring positive
(+) and Inner ring negative (-)*
2) 9VAC 1.5A Rocktron Adapter [Part number 006-1101 (110V)]*
3) 9VAC 1.5A Rocktron Adapter [Part number 006-1102 (220V)]*
PHANTOM POWER
The MIDI XChange can also run off Phantom power through
selected Rocktron products and the use of the Rocktron RMM900
7-Pin to 7-Pin MIDI Cable (sold seperately). This operation
requires you to use a 9VAC 1.5A Adapter 5.5/2.55mm Coax Plug
(not included) plugged into the back of select Rocktron products
(see connection diagrams for more detail). Power is then supplied
to the MIDI XChange through pins 6 and 7 of the RMM900 MIDI
Cord. This is a great set up to minimize adapters and cables out in
front of you on stage.