Rocktron Patchmate Loop 8 - Manual (Page 2)

2
Your PatchMate LOOP 8 has been designed to comply with the following Standards and Directives as set forth by the
European Union:
Council Directive(s): 89/336/EEC, 73/23/EEC, 76/769/EC, 1994/62/EC, 2000/
53/EC, 2002/95/EC
Standard(s): EN55022, EN50082-1, EN60065
This means that this product has been designed to meet stringent guidelines on how much RF energy it can emit,
and that it should be immune from other sources of interference when properly used. Improper use of this equipment
could result in increased RF emissions, which may or may not interfere with other electronic products.
To insure against this possibility, always use good shielded cables for all audio input and output connections. This will
help insure compliance with the Directive(s).
Copyright © 2008 GHS Corporation.
All rights reserved.
Active Input Impedance
Active Output Impedeance
Input Jacks
Send Jacks
Return Jacks
Output Jacks
Power requirements
Dimensions
MIDI In/Thru/Out
Phantom power
Presets
MIDI program change
Midi control
Relays
1.5M ohms
150 ohms
1/4” mono
1/4” mono
1/4” mono
1/4” mono
9VAC 3.4amps 4 pin DIN connector
1 rack space, 19” wide, 1 3/4” tall, ????” deep
Weight ????
7 pin DIN, (standard 5 pin cable plugs in without phantom power feature)
Thru/Out 5 pin DIN
Provided on MIDI IN jack pins 6 and 7 - 9VAC 2amps
128
0-127
Change commands in groups of 8 with 16 banks 0-7, 8-15, 16-
23.................120-127
Gas filled, contacts gold plated
SPECIFICATIONS