Rocktron Velocity V30D - Manual (Page 6)

POWER CORD PLUG
Using the supplied detachable power cord, plug the amplifier into any standard wall outlet. Please be sure
to check your local wiring and voltage to make sure your amplifier is the proper voltage for your area of the
world. Please follow all the precaution guidelines found in the front of this manual. When replacing the fuse,
please be sure to replace the fuse with the specific fuse as stated on the chassis next to the power cord plug.
A description on how to change the fuse is covered later in this manual.
BACK PANEL DESCRIPTIONS
* Rocktron single (RFS1) and double (RFS2) footswitches are available and sold separately.
FOOTSWITCH Jack
FOOTSWITCH Input - RFS2
Using a ROCKTRON RFS2 footswitch and a stereo cord (both sold separately) you can change the
channels between DISTORTION and CLEAN and turn the DIGITAL DELAY effect on and off.
13
14