Speaker jacks – Rocktron Velocity VH 160 R User Manual

Page 7

Advertising
background image

LINE OUT Jack
This 1/4” output jack provides a line level signal. This can allow you to plug into a recording device, power
amplifier, speaker simulator, PA system, etc. The line output is not controlled by the master volume control.
Please follow all manufacturer’s instructions when plugging this product into any outboard device.

22

FOOTSWITCH Input RFS2
Using a ROCKTRON RFS2 footswitch and a stereo cord (both sold separately) you can change channels
between DISTORTION and CLEAN and turn the REVERB ON and OFF.

EFFECTS LOOP RETURN
Using a standard guitar cable, connect this jack from the outputof the outboard effects device you are using.
This jack is a stereo RTS jack.

23

SPEAKER JACK - L (Left)
Using a speaker cable with 1/4 jacks you can plug into any 8 Ohm speaker cabinet as shown below.

SPEAKER JACKS

SPEAKER JACK - R (Right)
Using a speaker cable with 1/4 jacks you can plug into any 8 Ohm speaker cabinet as shown below.

25

24

* Rocktron single (RFS1) and double (RFS2) footswitches are available and sold separately.

26

Advertising