Rocktron Utopia G200B w/Banshee - Manual (Page 11)

11
Press the UP button once to move one preset bank up or press and hold down the button to auto-
scroll UP. Note that once you have reached your desired preset, the preset name on the screen
will be flashing but N OT r ecalled . The or iginal pr eset will still be active. N ow select any pr eset
1-3 to recall or activate the desired preset.
10 DOWN button
This button allows you to scroll DOWN through the preset banks and functions in the same man-
ner as the UP button (point 9).
11 PRESET button 1
This button allows you to select presets 1, 4, 7, 10, 13, 16, 19, 22, 25, 28, etc.. When you are in
Bank 01 this button allows you to select preset 4. When you are in Bank 02 this button allows
y ou to select pr eset 7 and so on. N ote that ther e is no 0 (zer o) pr eset. When in "2nd " mod e, this
button is used to turn On/Off the EFFECT that has been assigned to the preset selected.
12 PRESET button 2
This button allows you to select presets 2, 5, 8, 11, 14, 17, 20, 23, 26, 29, etc. When you are
in Bank 00 this button allows you to select preset 2. When you are in Bank 01 this button al-
lows y ou to select pr eset 5 and so on. When in "2nd " mod e, this button is used to tur n On/Off
the MUTE/TUNER Function. This will mute the output of the G200B and allow you to tune in
silence.
13 PRESET button 3
This button allows you to select presets 3, 6, 9, 12, 15, 18, 21, 24, 30, etc. When you are in Bank
00 this button allows you to select preset 3. When you are in Bank 01 this button allows you to
select pr eset 6 and so on. When in "2nd " mod e, this button is used to activate the TAP function
and set the DELAY Rate by tapping the button at the desired rate.
14 2nd Button
This button allows you to enter the 2nd Function Mode. In the 2nd Function Mode you can use
button 1 (EFFECT ON/OFF) to turn on and off a pre-assigned effect within the preset. You can
also access the MUTE/TUNER function using button 2 and set the delay rate within a preset us-
ing the TAP button (button 3). To Exit 2nd Function mode, press the 2nd Button.
15 BANSHEE TALKBOX GAIN Control
When the Banshee Talkbox is "on" use this contr ol to ad just the amount of pr eamp GAIN or
distortion added to the sound that is traveling up the talkbox tube.
16 BANSHEE TALKBOX TONE Control
When the Banshee Talkbox is "on" use this contr ol to ad just the over all TON E or equalization of
the sound that is traveling up the talkbox tube.
17 BANSHEE TALKBOX TUBE Hole
Insert the talkbox tube into this opening. This opening sits directly above the internal driver and
will direct the sound up the tube.
3. UTOPIA G200B Top and Back Panels....continued.....