Rocktron Nitro - Manual (Page 8)

Active LED - When lit the pedal is “active” or “on”
Boost Control - Provides the level of enhancement and boost.
Turning it clockwise increases the amount of “boost” - Turning it
counterclockwise decreases the amount of boost
DC 9V Input - To use external power (not provided) use only a 9-
Volt DC adapter
Input - Using a standard guitar cable with a 1/4” jack, plug your
guitar into this jack.
On/Off Switch - This switch determines whether the pedal is
“on” or “off” - When ON the large orange LED will be lit. When
OFF the LED will not be lit.
Output (Mono) Jack - use a standard guitar cable with a 1/4” jack
to connect to your next effect or directly into your amplifier.
9-Volt Battery Compartment - to access pull on small tab labeled
“OPEN”. Replace with a new 9-Volt battery. Always remember
to unplug your guitar cords from the pedal to conserve battery
life. Some battery drain may take place when unit is plugged in
(even if the unit is bypassed).
1
2
3
4
5
6
7
Controls