Rocktron Hypnotic Flange - Manual (Page 10)

DC 9V Input - To use external power (not provided) use only a 9-Volt DC
adapter
Input - Using a standard guitar cable with a 1/4” jack, plug your guitar
into this jack.
Output (Mono) Jack - When using the Hypnotic Flange in mono connect
a standard guitar cable with a 1/4” jack connect to your next effect or
directly into your amplifier.
Output (Stereo) Jack - When using the Hypnotic Flange in stereo (for
example plugging into two amplifiers) use this output jack for left side
out.
On/Off Switch - This switch determines whether the pedal is “on” or
“off” - When ON the blue LED will be lit. When OFF the LED will not
be lit.
9-Volt Battery Compartment - to access pull on small tab labeled
“OPEN”. Replace with a new 9-Volt battery. Always remember to
unplug your guitar cords from the pedal to conserve battery life. Some
battery drain may take place when unit is plugged in (even if the unit is
bypassed).
9
10
11
12
13
14
Controls Continued