Rocktron Short Timer - Manual (Page 9)

Specifications
Maximum Input
Input Impedance
Current Consumption
Power Requirements
+10dBu
1M ohm
27ma
9VDC <=300ma
* CE Approved *
Hints and Tips:
Digital Delay pedals usually sound better when placed after distortion.
Thus, if you are using a distortion pedal, place the Short Timer after the
distortion pedal in the signal chain. If you are using the amplifier’s
distortion try putting the Short Timer in the effects loop section of the
amplifier if you have it (please note - follow all instructions in your
amplifier manual when using the effects loop).
Short, quick delays or slapbacks are the most widely used delays in
today’s music. For distorted rhythm playing set the delay to “Shorter” and
the delay level and regeneration levels low. For distorted lead playing, set
the delay to “Short” and bump up the delay level and the regeneration
level to taste. For chicken pickin type delay set the delay level to
“Shorter” and bump up the delay level and regeneration level slightly.
Of course, these are just suggestions, we recommend you experiment with
this a little to find “your” sound.