Adjustment instructions continued – ROHO DRY FLOATATIO cushion User Manual
Page 8
7
9. Slide your hand between the cushion’s surface
and the user’s bottom. Lift their leg slightly
and feel for their lowest bony prominence. Then
lower their leg to a sitting position.
10. Open valve to let out air, while keeping your hand
under the person’s lowest bony prominence.
11. Release air until you can barely move your finger
tips.
INFLATION: DO NOT sit on an improperly
inflated cushion. Under-inflation and
over-inflation of the cushion, including individual
sections, reduce or eliminate the cushion's
benefits and could increase risk to the skin and
other soft tissue. The cushion is most effective
when there is 1/2 inch (1.5 cm) to 1 inch (2.5 cm)
of air between the user's bottom and the seating
surface.
12. Turn valve to close. (Repeat steps 9 - 12 for
remaining air valves on multi-valve cushions.)
13. (SELECT CUSHIONS ONLY) Position user on the
cushion in their desired posture and have them
maintain this position while air transfers through the
ISOFLO Memory Control. Once the air transfer is complete,
push the ISOFLO's “Red” knob toward the center, in
the LOCKED position. This will isolate the flow of air and
provide a more stable sitting position. Recheck each
compartment of the cushion to ensure proper inflation.
ADJUSTMENT INSTRUCTIONS CONTINUED: