ROHO JetStream Pr System - Manual (Page 3)

2
CAUTION
Before using the JetStream Pro, ROHO, Inc. recommends a clinician evaluate the
need for anti-tipping devices or amputee axle adaptors. As with any addition to
your wheelchair, the JetStream Pro may affect the stability of the wheelchair.
DO NOT lean over the top of the JetStream Pro. This may cause your center of
gravity to change and may cause you to tip over.
DO NOT use if user is over 250 lbs. (113 . 4 kg).
DO NOT attach the JetStream Pro with the user in the chair.
Protect the JetStream Pro from blunt force shocks that may cause damage and/or
breakage.
Check screws, clamps, and brackets for wear, breakage, and tightness daily.
Retighten loose screws following the Attachment Instructions in this manual.
DO NOT continue to use the JetStream Pro if any part cannot be tightened or is
broken.
The JetStream Pro may not fit every wheelchair; please refer to the Wheelchair
Compatibility Chart in this manual. Consult with your provider or clinician
providing your equipment for compatibility with your wheelchair.
Altering the JetStream Pro may affect performance and will void warranty.
Only use hardware supplied with the JetStream Pro. If replacement parts are
needed please contact your ROHO provider.
If the JetStream Pro is not positioned to make contact at the PSIS, pelvic support
and trunk control may be reduced (see page 3).
DO NOT use the JetStream Pro to lift your wheelchair.
DO NOT use the JetStream Pro near an ozone generator, as the ozone generator
may deteriorate the foam pad and other materials, and void your warranty.
•
•
•
•
•
•
•
•
•
•
•
•
WARNING
DO NOT operate the JetStream Pro without first reading and understanding
this manual. If you need assistance contact your clinician, ROHO provider or
ROHO, Inc.
The JetStream Pro has not been tested for use in a motor vehicle. The risk of an
accidental disconnect that could result in a fall and potential serious injury has
not been assessed. Always have the user transfer to an approved vehicle seat.
•
•