RTA Products RTA-S13 - Manual

MODEL RTA-S13 MODEL RTA-S13
FILING CABINET FILING CABINET
MODEL RTA - S13 MODEL RTA - S13
IMPORTANT: Surfaces must be cleaned with a
solution of a smooth soap and water, then cleared
with a dry towel. Do not use solvents over surfaces
or structural tubes.
IMPORTANT: Surfaces must be cleaned with a
solution of a smooth soap and water, then cleared
with a dry towel. Do not use solvents over surfaces
or structural tubes.
ASSEMBLY INSTRUCTION ASSEMBLY INSTRUCTION
Thanks for purchasing one of our products, please read carefully the assembly
instructions before the installation (Attention: Do not tighten the screws before
all screws are in place). Thanks for purchasing one of our products, please read carefully the assembly
instructions before the installation (Attention: Do not tighten the screws before
all screws are in place).
English English