DigiTech RP250 - Manual (Page 35)

29
Depth - Knob 3 adjusts the Depth of the modulation. Ranges from 0 to 99.
Regeneration - Knob 4 controls the regeneration of the effect. Ranges from 0 to 99.
Waveform (X-Edit
TM only) - Selects a waveform: triang, Sine, or Square.
Level (X-Edit only) - Controls the level of the effect. Ranges from 0 to 99.
Vibrato (viBrat)
A Vibrato effect modulates the pitch of the incoming signal at an even rate.
Speed - Knob 2 adjusts the rate (Speed) at which the pitch modulates. Ranges from 0 to
99.
Depth - Knob 3 adjusts the intensity (Depth) of the modulating pitch. Ranges from 0 to
99.
Rotary Speaker (rOtArY)
Rotary Speaker is an emulation of a device that included a spinning horn and woofer. The rotation
of these two speakers produced an interesting combination of the sound panning from side to
side. This produced a slight pitch change due to the speed of the sound coming towards, and then
going away from the listener.
Speed- Knob 2 adjusts the rate (Speed) of the spinning speakers. Ranges from 0 to 99.
Intensity - Knob 3 controls the intensity of the effect. Ranges from 0 to 99.
Doppler - Knob 4 controls the Pitch Shift effect that is the ratio between the horn and the
rotor positions. Ranges from 0 to
99.
Crossover (X-Edit TM only)- Selects the crossover frequency between the horn and rotor.
Ranges from 0 (200 Hz) to 99 (1600 Hz).