Dynex DX-WGDTC - Manual (Page 2)

2 Contents
Dynex DX-WGNBC or
DX-WGDTC Wireless LAN
Card
Contents
Introduction ..................................................................................... 2
Installing the software and hardware .............................................. 2
Configuring the wireless network .................................................... 4
Troubleshooting ............................................................................... 6
Legal notices .................................................................................... 7
Français ....................................................... 8
Español ...................................................... 15
Introduction
Thank you for purchasing a Dynex Wireless LAN 802.11g notebook or
desktop card. This package contains the following:
• A Wireless LAN 802.11g notebook or desktop card
• A printed user guide
• A CD containing the wireless network card utility and drivers and
this user guide
If anything is missing, contact Dynex at (800) 305-2204.
Installing the software and
hardware
Use the following procedures to set up your wireless network.
To install wireless networking on a Windows XP computer:
Caution: Do not insert the notebook or desktop card until instructed to do
so.
1 Install the access point. For more information, see the access point
documentation.
2 Turn on your computer.
3 Insert the included CD in the optical drive.
4 If the installation program does not start automatically, use
Windows Explorer or My Computer to browse the CD and locate
the file named setup.exe, then double-click setup.exe to start
installing the software.
5 Follow the on-screen instructions to install the software.
6 If you are installing a desktop card, turn off your computer, install
the card, then turn on your computer again. The Found New
Hardware Wizard opens.
-OR-
Insert your notebook card into the appropriate slot in your
notebook. The Found New Hardware Wizard opens.
7 Click Install the software automatically (Recommended),
then click Next.
8 If a warning box opens, click Continue Anyway. Your computer
copies files to your hard drive.
9 Click Finish.
To install wireless networking on a Windows 98, Windows 2000, or
Windows ME computer:
Caution: Do not insert the notebook or desktop card until instructed to do
so.
1 Install the access point. For more information, see the access point
documentation.
2 Turn on your computer.
3 Insert the included CD in the optical drive.
4 If the installation program does not start automatically, use
Windows Explorer to browse the CD and locate the file named
setup.exe, then double-click setup.exe to start installing the
software.
5 Follow the on-screen instructions to install the software.
6 If you are installing a desktop card, turn off your computer, install
the card, then turn on your computer again. The Found New
Hardware Wizard opens.
-OR-
Insert your notebook card into the appropriate slot in your
notebook. The Found New Hardware Wizard opens.
DX-WGNBC_WGDTC_combo.fm Page 2 Wednesday, June 21, 2006 11:53 PM