Ruark Audio R7 - Manual (Page 21)

21
EN
DA
DE
FR
IT
ES
NL
NO
Recall preset
Press PRESET then either repeatedly press it again or
rotate the CONTROL KNOB to cycle through the available
preset stations. Press SELECT when the preset station
you want to listen to is shown.
Secondary services
Some DAB radio stations have one or more secondary
stations associated with them. If there is a secondary
station available it will appear as the next station in the
station list. Select a secondary service like you would any
other DAB station.
Station order
You can choose the order of the DAB station list to be
either Alphanumeric or Ensemble. Ensemble groups
stations from the same broadcaster, for example all BBC
stations are shown together.
To change station order, select
Menu > Station order
and select Alphanumeric (default) or Ensemble.
Find new stations
If you move the system to a different part of the country,
install a more sensitive aerial, or you want to add new
stations to the list, you will need to perform a station scan
by selecting
MENU > Scan.
Remove weak or invalid stations
Remove weak (burbling) or invalid (marked with ‘?’)
stations by selecting
MENU > Prune stations.
DAB & FM aerials
In strong signal areas the supplied indoor aerial will give
adequate reception in both FM and DAB. However, it is
only intended as a temporary measure and we highly
recommend using an outdoor aerial.
Under most conditions, a combined FM/DAB aerial will
give good performance, but separate outdoor FM and
DAB aerials will always give the best reception.
Using a single aerial
(Default setting)
Connect a 75 Ohm aerial to the connector marked
DAB/FM (39), then select
MENU > System settings >
Antenna> Combined antenna.
Using separate aerials
Connect a 75 Ohm FM aerial to the connector marked
FM (38) and a 50 Ohm DAB aerial to the one marked
DAB/FM (39), then select
MENU > System settings >
Antenna> Separate antenna.
RA R7 user guide.indd 21 31/10/2013 14:57:39