Ruark Audio MR1 - Manual (Page 7)

7
1
Connect your device
To connect you will need a lead with a 3.5mm
stereo jack on one end to connect to the Line-in
input socket (16) and an appropriate connector on
the other to connect to the Line-out or headphone
output of the device you wish to connect, MP3/CD
Player, Laptop or TV etc.
2
Select Line-in audio input
When the status indicator (9) is amber, the audio
input is set to Line-in.
If the status indicator (9) is blue the speakers are in
Bluetooth mode, in which case press and hold the
control knob (8) or press the Line-in button (20) on
the remote control to change to Bluetooth mode.
If the status indicator (9) is off, the speakers are in
standby, in which case press the control knob (8), or
press the Line-in button (20) on the remote control to
turn them on.
3
Start music play on your device
Adjusting input level
Unless you experience audio distortion, we recommend
you keep the output volume on your device near
maximum and the input level switch (17) set to LOW.
Some computer headphone or audio outputs may have
high signal levels. If the sound is distorted, turn down
the volume level on the device.
Other audio devices, such as CD/DVD/Blu-ray players,
may also have high output signals but without the ability
to adjust the output volume. In this case, slide the input
level select switch (17) to HIGH to attenuate the signal
and prevent distortion.
For latest advice and useful hints and tips, please visit
www.ruarkaudio.com
5 Playing audio through the Line-in input socket
EN
DA
DE
FR
IT
ES
NL
NO