Rupert Neve 5060 Centerpiece: 24x2 Desktop Mixer - Manual (Page 9)

9
While you can patch the source into a processing module before the input of the 5060 on channels
1-24, we recommend also normalling the insert send and return together on another row of the patchbay
for channels 1-8, as to avoid cutting off the signal when the insert is engaged with nothing patched in.
For using the faders as mono center channels, the signal will be sourced from the left input (i.e. 1,3,5,7).
DB 25 Connector Pinout
G C H G C H G C H G C H G C H G C H G C H G
13 1
25 14
C H
1 2 3 4 5 6 7 8
USB / MIDI Setup Instructions
Either USB or MIDI can be used to provide DAW transport control from the 5060. The USB functionality
of the 5060 is plug and play in both PCs (win 7 and newer) and Mac (10.3 and newer). For older
operating systems, the USB may work, however we recommend using a MIDI interface. 5060: Rupert
AC input
Main Inputs 1-8
Monitor Outputs
Chassis Gnd External to Monitor Stereo Outputs
IEC input with
power switch.
Auto-switching
for 100-240V
Balanced DB-25
Inputs for
Channels 1-8 with
100mm faders
and inserts
Balanced, Transformer
coupled XLR outputs
for sending the mix signal
to a 2-track recorder
Isolates the direct
connection from
audio signal
ground to chassis
earth Balanced DB-25
Inputs for the external
monitor sources
STEREO L
STEREO R
SEND L
MIX INSERT TALK
RET L
SEND R
RET R
MON 3L
MON 3R
MIDI IN
MIDI OUT
GND
LIFT
USB
MONO
1/2 3/4 5/6 7/8
STEREO
MON 2L
MON 2R
MON 1L
MONITOR OUTPUTS
MON 1R
TB OUT
TB SW
AUX INPUTS 9-16
AUX INPUTS 17-24
INSERT SEND 1-8
INSERT RETURN 1-8
EXTERNAL TO MONITOR
MAIN INPUTS 1-8
CAUTION
Risk of Electric Shock
Disconnect from outlet
before removing cover
100-240 VAC
50/60Hz 60 Watts
MADE IN USA
Rupert Neve Designs, LLC
Model 5060
MIX OUTPUT
USB / MIDI Control
UMC or HUI control of
the DAW is available
through both USB and
MIDI
Mono / Stereo
Switches between
Stereo L-R and Mono
on Ch 1-8. When
mono, the signal is
sourced from the left
channel
Aux Inputs 9-24
Balanced DB-25
Inputs with rotary
faders for
controling level
Mix Insert
Balanced, transformer
coupled insert send and
return on the mix buss.
The send is always
active, and the return is
engaged with the insert
switch
Talkback
TRS talkback out to
send to an external
headphone mixer, or
studio foldback, with a
1/4” TS talkback
remote trigger input
Balanced, transformer
coupled outputs, selected
by the monitor select
switches. Mon 3 can be
latched on by holding the
Mon 3 switch for two
seconds
Channel Inserts
Balanced DB-25
insert sends and
returns. The send is
always active, and
the return is engaged
with the insert switch
5060 Back Panel