Rupert Neve Portico 542 - 500 Series Tape Emulator with Silk - Manual (Page 7)

7
SPECIFICATIONS
LINE AMP SPECIFICATIONS (Measurements with tape circuit disengaged)
NOISE:
Measured at Main Output, un-weighted, 20Hz-22kHz, Input Terminated 40
Ohms.
Unity Gain Better than -100dBu
FREQUENCY RESPONSE
Measured at +10dBu, trim at unity.
Main Output +/- 0.25dB from 5Hz to
60Khz
-2dB @ 120KHz
MAXIMUM OUTPUT LEVEL 23.25dBu
TOTAL HARMONIC DISTORTION AND NOISE:
@ 1kHz, +20dBu output level Better than 0.0025%
@ 20Hz, +20dBu output level 0.07% Typical (2nd and 3rd
harmonic)
TAPE FX SPECIFICATIONS
NOISE:
Measured at Main Output, un-weighted, 20Hz-22kHz, Input Terminated 40 Ohms.
Saturation @ minimum Better than -100dBu
Saturation @ maximum Better than -100dBu
FREQUENCY RESPONSE:
15 IPS, Input @ -0 dBu -3dBu @ 28kHz
Saturation @ minimum 0dBu @ 10Hz
+5dBu Peak @ 60Hz
Saturation @ maximum -3dBu @ 20kHz
-3dBu @ 12.5Hz
+2.4dBu Peak @ 60Hz