Sanuvox SABER LOW VOLTAGE 24V - Manual

SANUVOX 24VAC UV LAMP SYSTEM
INSTALLATION INSTRUCTIONS
Before installing or performing maintenance or
service on the purifier, turn off main power switch to
unit. Electrical shock can cause injury or death. There
may be more than one disconnect switch.
Never expose eyes or skin to ultraviolet light from any
source. The Purifier MUST be DISCONNECTED from
power source before performing maintenance or
service. Personal injury may result.
Do not touch Lamp glass without gloves. Reduced
performance of Lamp may result. Clean Lamp after
handling.
Use only specified replacement Lamps with you
Purifier. Use of an incorrect Lamp can result in damage
to the Purifier and/or Lamp.
WARNING
WARNING
WARNING
The UV Lamp contains a small quantity of mercury. If a
Lamp breaks, clean and dispose of with care.
WARNING
PLEASE SAVE FOR YOUR RECORDS
Date Code#
Date Installed:
Installed By:
Installers Contact info.:
WARNING
Follow all safety codes.
Wear safety glasses and work gloves.
24VAC Ultraviolet Lamp System