Sanuvox S1000FX - Manual (Page 2)

COMMERCIAL SYSTEMS
Before installing or performing maintenance or service
on the purifier, DISCONNECT from main power.
Electrical shock can cause injury or death.
Never expose eyes or skin to ultraviolet light from any
source. The Purifier MUST be DISCONNECTED from
power source before performing maintenance or
service. Personal injury may result.
Do not touch Lamp glass without gloves. Reduced
performance of Lamp may result. Clean Lamp after
handling.
Use only specified replacement Lamps with your
Purifier. Use of an incorrect Lamp can result in damage
to the Purifier and/or Lamp.
WARNING
WARNING
WARNING
The UV Lamp contains a small quantity of mercury. If a
Lamp breaks, clean and dispose of with care.
WARNING
WARNING
SAFETY CONSIDERATIONS
When servicing UV purification-filtration equipment, observe precautions in the literature, tags and labels attached to the unit, and other safety
precautions that may apply. Follow all safety codes. Wear safety glasses and work gloves.
GENERAL
The S1000FX-GX is a combination Ultraviolet - Filter Air Purification System. The S1000FX-GX UV Germicidal Photo-Oxidation process
(UVC/UVV) destroys bio-chemical contaminants such as mold, viruses, bacteria, germs, chemicals, cigarette smoke, VOC’s and odors. The
S1000FX-GX is also equipped with two 1” pre-filters and a MERV 14 (95%) efficiency filter. 99.97% HEPA Filter available. Details below.
OPTIONS
Depending on the model ordered, there may be additional options available.
SUBKITCROS1000: Clean Room Option. Incl. (1) HEPA 99.97% Filter (1) BST120W5 or (1) BST230W5 Secondary ballast (1) secondary
LMPRGJ160 31.5” UVC ‘J’ Lamp.
SUBKITVOCS1000: VOC Kit incl. (1) VOC Sensor (1) BST120W5 or (1) BST230W5 secondary ballast (1) secondary LMPRXJ160 UVV ‘J’
Lamp.
MSCFTR12: An optional 99.97% efficient HEPA filter (20” x 20” x 4”)
MSCFTR12-1: An optional 99.97% efficient HEPA filter (20” x 20” x 5”)
biological contaminants.
1-888-726-8869 www.sanuvox.com SANUVOX TECHNOLOGIES INC. COPYRIGHT 2010 v.1.0
A
B
C
D
E
F G
H
I
A. 1 x pair of 8” inlet collars
B. 1 x pair of 8” outlet collars
C. Aluminum Reflecting Chamber
D. 31.5” UV ‘J’ Lamp
E. Ballast F. 2 x 1” Pre-Filter
G. Main Filter (MERV 14 or opt. HEPA)
H. Power
I. Doors
J. Safety Cut-Off Switch
J