Simaudio 300D v.2 DAC - Manual (Page 10)

MOON 300 D v.2 Digital-to-Analog Converter
Specifications
Type ....................................................................... Solid State
Power Supply Transformer ....................................... 10VA
Power Supply Capacitance ...................................... 13,200µF
Digital Input Types .................................................. S/PDIF (RCA) x 2 USB x 1 TosLink x 1
Digital Input Impedance (S/PDIF) ........................... 75 ohms @ 0.5 Volts
DAC / Digital Filter ................................................... BurrBrown PCM1793
Bit-depth range – All inputs ................................... 16 - 24 bits
Sampling Frequency Rates – All inputs .................... 44.1, 48, 88.2, 96, 176.4 and 192kHz
Frequency Response (audible) ................................ 20Hz - 20kHz +0/-0.2dB
Frequency Response (full range) ............................ 2Hz - 72kHz +0/-3dB
THD @ 1kHz, 0dBFS (A-weighted) ......................... < 0.001 %
IMD ....................................................................... < 0.004 %
Dynamic Range ...................................................... > 116dB
Signal-to-noise ratio ............................................... > 115dB @ full output
Slew Rate .............................................................. 50V/µs
Channel Separation ................................................ > 115dB
Low Level Linearity ................................................. ±1.0dB to below 120dBFS
Intrinsic Jitter ......................................................... < 25 picoseconds
RMS
Single-ended Analog Output (RCA) ........................... 1 pair
Balanced Analog Output (XLR) ................................. 1 pair
Max. Analog Output @ 0dBFS - Standard ............... 2.0 Volts RMS
Output Impedance – Single-Ended ........................... 100
Ω
Output Impedance – Balanced ................................ 100 Ω
IR Input................................................................... 1/8” Mini jack
Power Consumption @ idle ..................................... 5 Watts
AC Power Requirements ......................................... 120V / 60Hz or 240V / 50Hz
Shipping Weight ..................................................... 7 lbs / 3 Kgs
Dimensions (W x H x D, inches) .............................. 7.5 x 3.25 x 11
Balanced Pin Assignment: Pin 1................................ Ground
Pin 2................................ Positive
Pin 3 .............................. Negative
Fuse Replacement: For the 120V version use a 0.2A slow blow (5 x 20mm size).
For the 230V version use a 0.1A slow blow (5 x 20mm size).
____________________________________________________________________________________
Specifications 10