Simaudio 650D DAC - Manual (Page 7)

650 D DAC / CD Transport
____________________________________________________________________________________
7
Unpacking
The MOON 650D DAC / CD Transport should be removed from its box with care.
The following accessories should be included inside the box with your Digital-to-Analog Converter / CD Transport:
9 AC power cable
9 ‘FRM-3’ remote control with three ‘AAA’ batteries (USA and Canada only)
9 ‘SimLink’ cable with 1/8” mini plug terminations on each end
9 This owner’s manual
9 Warranty and product registration information (USA and Canada only)
Once the 650D is unpacked, inspect it thoroughly
and report any damage to your dealer immediately.
We suggest that you keep all of the original
packaging, storing it in a safe, dry place in case
you’re required to transport this product. The
customized packaging is specially designed to
protect the 650D from any potential damage during
transit.
Please write the serial number of your new MOON 650D in the space provided below for future reference.
Serial No.: ________________
Installation & Placement
The MOON 650D DAC / CD Transport should be
placed on a solid, level surface. You should avoid
placing it near a heat source or inside a closed
cabinet that is not well ventilated as this could
compromise the preamplifier’s performance and
reliability.
If the surface you have chosen isn’t perfectly level,
each of the four (4) legs of your 650D are height
adjustable; carefully using your fingers, you can
either raise each leg by turning the cone underneath
clockwise, or lower each leg by turning it
counterclockwise.
We strongly recommend that you leave these cones
mounted to the component at all times for reasons
related to both performance and aesthetics.
If you intend to use the 650D’s USB input
connection with a Windows-based computer,
you will need to install our USB HD driver,
which can be downloaded from the support
section of our website. Note: Apple-based
computers don’t require this driver.