Singing Machine iSM990 - Manual (Page 12)

Operation
1
Connect the unit as described
previously. Press the Power ON/OFF
button to turn the unit on; the Power
indicator will light.
2
Repeatedly press the FUNCTION button
until “bt” blinks in the display to select
the Bluetooth mode.
3
“bt” will blink rapidly to show the unit is
in the Pairing mode. If it is not blinking
rapidly, press and hold the PAIRING
button until “bt” blinks rapidly in the
display.
4
Switch on the Bluetooth function of
your Bluetooth compatible device
within three feet of the iSM990BT. You
will see “
Singing Machine” appear on
your device’s search list.
Note: Please always refer to the user manual of
your Bluetooth device for detailed instructions.
5
Select “ Singing Machine” to start
pairing. Wait for completion of the
pairing and “bt” will stop blinking in the
display.
Notes:
• If your Bluetooth device prompts you for a
passcode during the pairing process,
please enter “0000” to connect.
• After initial pairing, the unit will stay paired
unless unpaired manually by the user or
erased due to a reset of the devices.
• If your device should become unpaired,
follow the above steps again. If any pairing
issues should occur, unpair the unit on your
Bluetooth device and follow the above steps
again.
Using a Bluetooth Device
u v
E - 11