Sioux Tools 270A-4 - Manual

1
Form Z489
Date 2009August8/C
Page 1 of 4
Printed In U.S.A.
INSTRUCTIONS & PARTS LIST FOR 270A, 270A-2, & 270A-4
SIOUX RIVET HAMMERS
(SERIAL D)
SAVE THESE INSTRUCTIONS!
Power tools can cause flying particles.
Proper eye protection must be worn at all times by tool user and bystanders.
Flying particles can cause eye injury.
Power tools generate noise.
Ear protection must be worn with this tool.
Prolonged exposure to noise can cause hearing loss.
Power tools vibrate.
Excessive vibration can cause injury. If numbness, tingling, pain or whitening of the skin occurs, stop
using tool and consult a physician.
Prolonged exposure to vibration can cause injury.
This tool is not insulated for contact with electric power sources.
Do not use near live electric circuits. When drilling into walls, be aware that they may have hidden
electric wires.
Electric shock can cause injury.
This tool is not intended for use in an explosive atmosphere.
Do not use this tool in a flammable or explosive atmosphere.
Explosions and fire can cause injury.
Power tools can generate unexpected movement.
Keep a firm grip on the tool at all times. Be sure your body position allows you to have control of the
tool at all times. Make sure your footing is secure.
Unexpected tool movement can cause injury.
Poorly maintained and lubricated tools can fail unexpectedly.
Keep tool properly lubricated and in good repair at all times. Use only Sioux Air Motor Oil No. 288. See
the tool’s information sheet to find out what other greases and oils to use. Do not drop the end of the
hose on the floor where it will pick up dirt and transport it into the tool. See information sheet for any
additional maintenance requirements.
Unexpected tool failures can cause injury.
Tools not operated at proper air pressure can operate erratically.
Do not exceed a maximum air pressure of 90 psig/6.2 bar.
Erratic operation in power tools can cause injury.
Tools left connected to the air supply while making adjustments, changing accessories, or doing any
maintenance or service on tool can start unexpectedly.
Always remove tool from air supply and activate trigger to bleed air line before making any adjustments,
changing accessories, or doing any maintenance or service on tool. Be sure that the chisel retaining
spring (#1) is properly installed before turning the tool on.
Tools starting unexpectedly and flying chisels can cause injury.
WARNING
When used improperly power tools can create hazardous situations.
Everyone using, maintaining, changing accessories or working near this tool must read, understand and follow
these Safety Instructions!
Improperly used power tools can cause injury or death.