Sioux Tools SRS10S STRAIGHT - Manual

1
WARNING
When used improperly power tools can create hazardous situations.
Everyone using, maintaining, changing accessories or working near this tool must read, understand and
follow these Safety Instructions!
Improperly used power tools can cause injury or death.
INSTRUCTIONS & PARTS LIST FOR SRS10P PISTOL & SRS10S STRAIGHT
SERIES RIVET SHAVERS
SERIAL “A”
Read and understand these instructions before operating this tool.
SAVE THESE INSTRUCTIONS!
RIVET SHAVER SAFETY
Power tools can cause flying particles.
Proper eye protection must be worn at all times by tool user and bystanders.
Flying particles can cause eye injury.
Power tools generate noise.
Ear protection must be worn when tool noise level exceeds 85 dBA. We also recommend that ear
protection be worn when the tool noise level is below 85 dBA. See the tool’s information sheet for the
noise level.
Prolonged exposure to noise can cause hearing loss.
Power tools vibrate.
Excessive vibration can cause injury. If numbness, tingling, pain or whitening of the skin occurs, stop
using tool and consult a physician. See the tool’s information sheet for the vibration level.
Prolonged exposure to vibration can cause injury.
Power tools present a risk of entanglement.
Keep loose hair away from power tools and accessories. Keep hands away from moving parts of the tool
and accessories. Do not wear jewelry, loose clothing, or neckwear around power tools. Keep work area
clear of cleaning rags and all items that could become entangled with the tool.
Entanglements can cause injuries.
Rivet shaving operations creates dust.
Do not breathe rivet shaving dust. Use approved mask.
Breathing rivet shaving dust can cause injury.
This tool is not intended for use in a flammable or explosive atmosphere.
Do not use this tool in a flammable or explosive atmosphere.
Explosions and fire can cause injury.
Using excessive force on a tool makes it hard to control.
Do not force tool.
Hard to control tool can cause injury.
Taping or wiring the throttle valve in the “ON” position will prevent the tool from shutting off if the tool should jam
or malfunction or if anything unexpected happens.
Do not wire or tape down the “On-Off” valve of any power tool.
Tools that are prevented from shutting off can cause injury.
Poorly maintained and lubricated tools can fail unexpectedly.
Keep tool properly lubricated and in good repair at all times. Use only Sioux Air Motor Oil No. 288. See
the tool’s information sheet to find out what other greases and oils to use. Do not drop the end of the
hose on the floor where it will pick up dirt and transport it into the tool. See information sheet for any
additional maintenance requirements.
Unexpected tool failures can cause injury.
Form ZCE777
Date 2009September3/E
Page 1 of 24
Printed In U.S.A. 250 Snap-on Drive • PO Box 1596 • Murphy, NC 28906 • USA • Phone: 828-835-9765 •www.siouxtools.com