SkyRC T6200 Charger - Manual (Page 2)

Congratulations on your choice of the SKYRC T6200 Professional Balance Charger/
Discharger Battery Meter / Motor RPM Tester / Servo Tester from SKYRC Technology
Co., Ltd. This unit is simple to use, but the operation of a sophisticated automatic charger
such as SKYRC T6200 does require some knowledge on the part of the user. These
operating instructions are designed to ensure that you quickly become familiar with its
functions. It is therefore important that you read right through the Operating Instructions,
Warning and Safety Notes before you attempt to use your new charger for the first time.
We hope you have many years of pleasure and success with your new battery charger.
SKYRC T6200 represents the newest technology of chargers with its advanced touch
system. As it is a “touch” charger, of course the screen plays an important role in this
system. We equip it with a 3.2” (320*240 dot) touch sensitive color LCD screen. It is
intuitive as all the operating instruction and changing status can be displayed in this
screen and the touch screen can register the users' input precisely so that the users can
have a wonderful and comfortable “touch” experience.
When the charger is working, the users could check the information of charging capacity,
cell voltage, charging time, external and internal temperature easily. What's more, it can
also display the voltage in a graphic which helps the user monitor the charging status all
the time.
SKYRC T6200 is a high-performance, micro processor control charge/discharge station
with battery management suitable for use with all current battery types. With integral
equalizer for six-cell Lithium- Polymer (LiPo), Lithium-Ferrum (LiFe) and Lithium-Ion
(LiIon) batteries; maximum 12A charge current; maximum 200W charge power. It can be
powered by a 12V car battery or a high quality AC-DC power supply in the range of 12V
to 18V DC output, with minimum current rating of 20A to insure reliable performance.
When a NiMH/NiCd battery is fully charged, the unit terminates the process using the
Delta-Peak method. Lithium and lead (Pb) batteries are charged using the CC-CV
method.
The fan cooling system is so smart and efficient. The fan speed is controlled by internal
temperature sensor.
It also adds lithium Battery Volt Meter, Motor RPM Tester and Servo Tester functions. It is
convenient for user to get some useful information with this charger.
Please BE SURE to read these INSTRUCTIONS, WARNING and SAFETY NOTES
before you use the charger for the first time.
It can be dangerous to mis-handle batteries and battery chargers, as there is always a
risk of batteries catching fire and exploding.
Please read this entire operating manual completely and attentively before using this
product, as it covers a wide range of information on operating and safety. Or please do
use this product in company with a specialist!
TABLE OF CONTENTS INTRODUCTION
01 T6200
INTRODUCTION
INTRODUCTION
MAIN FEATURES
WARNING AND SAFETY NOTES
HOMEPAGE
OPERATION PROGRAM
CHARGING STATUS MONITOR
USING THE CHARGE CONTROL SOFTWARE “CHARGE MASTER”
BATTERY METER
MEMORY PRESET-DATA STORE/LOAD
SETTING
ERROR MESSAGE
SPECIFICATION
RECOMMENDED ACCESSORIES
CONFORMITY DECLARATION AND LIABILITY EXCLUSION
WARRANTY AND SERVICE
01
03
05
07
08
14
14
15
16
17
18
19
21
22
23
24
24
MOTOR RPM TESTER
SERVO TESTER