Sonnox Oxford EQ including GML - Manual (Page 20)

8 DESCRIPTION OF CONTROLS
The +/- rotary controls set boost or cut gains for each section. If your host supports
scroll-wheel operation to the knob controls, then each increment or decrement of
the scroll wheel will increase/decrease the gain value by exactly 0.5dB, thus
allowing for an accurate incremental step.
The IN buttons enable individual sections of the EQ to be switched in/out.
A and
B Buttons
Two complete EQ / filter settings can exist simultaneously. The A and B buttons
allow you to toggle between them for comparison purposes.
Main
Gain
Controls
This sets the attenuation level of the complete EQ section to avoid clipping signals
when in boost.
EQ Type
Selection
The +/- buttons increment through the available EQ types, as shown in the character
display above.
Master
IN Button
Applies the EQ function type selected as described above The IN button light will go
out if another EQ type is selected, indicating that the EQ remains unchanged until
the IN button is selected again.
Overload
Indicator
This (just above the EQ Type window) displays any signal overload (red) at the output
of the EQ and Filter sections. This can be disabled via the Sonnox button menu (see
below). When active, the default mode for this function is latching, requiring a click
to reset. The options menu provides a mechanism to select the duration of the
overload indicator.
Sonnox
Menu
Clicking the Sonnox button displays a drop-down options menu.
www.sonnox.com 20 Go
to
contents