Sonnox Oxford Transient Modulator - Manual (Page 9)

3 DESCRIPTION OF CONTROLS
appears at the output of the plug-in, short-term peaks can be effectively reduced without
apparent loss of overall sonic character.
To achieve this effectively, very small overshoot and recovery values should be used with
a minimum rise time setting, in order to catch the fastest transients only. A negative ratio
coupled with a suitable dead band setting can be obtained that reduces transients by the
required amount, allowing the overall level of the programme to be increased before
limiting occurs.
Note:
Since the TransMod is an adaptive process that constantly changes witprogramme
content, the peak limiting function will not be as predictable and accurate as that
provided by a programme limit.
3 Description
of
Controls
Note that the parameter settings provide continuous feedback of settings values, and
have type-in fields so you can change values directly from your keyboard.
Input
Section
INPUT meter
Displays Input drive levels.
www.sonnox.com 9 Go
to
contents