Sonodyne AMD 200 - Manual (Page 12)

VOX Output:
The VOX Output window allows you to adjust when the VOX Output is triggered and by
what sources.
The VOX Output threshold control allows you to adjust at what level the will
VOX output will trigger
The Vox logic is selectable as to which Mic/Line input it is triggered off.
By default the Vox threshold is set to -35 db with no trigger source enabled.
For more infomation about the VOX trigger output see page 5.
Enable Setup:
The Enable Setup window allows you to enable and disable VCA and Front Panel Control.
If control is active the blue light will be activated next to that option.
ATTENTION: When enabling and disabling either of these functions
the chance of the output level reaching excessive levels is present.
Please be sure to mute the outputs before adjusting these options.
The volume controls inside the AMD Mixer amplifi er are in series. There for having
the GUI based volume control at a minimum but the front panel control at full will result
in no audio. See page 6 for details.
All three volume controls are in series. Overall volume will always be the resultant
of front panel, virtual volume and VCA volume.
The factory default has the front panel enabled and GUI based volume controls
set to 0db so it performs like a normal mixer amplifi er.
PAGE 12 AMD100/200 INSTALLATION AND OPERATION MANUAL
USING THE GUI