SOR Calibration Manager Software - Manual

1/12 Form 1459 (01.13) ©SOR Inc.
These instructions provide information on the
installation, connection and operation of the
Calibration Kit for use with SOR ® 805 Series pressure
products, specifically the 805PT and 805QS. This
kit includes an SOR Calibration Interface and SOR
Calibration Manager software that allows the user to
verify, adjust and re-calibrate a device from scratch
to implement turndown and zero offset, or adjust the
zero output of a device to account for environmental
effects. For the 805QS, the software also allows the
user to verify, adjust, and re-calibrate the switch output settings.
The SOR Calibration Manager is economical, proprietary software which is compatible
with all Windows XP SP3 or newer operating systems including Windows Vista, ® and
Windows 7, and Windows 8 operating systems.
Calibration Kit
Registered Quality System to ISO 9001
Hardware and
software are
subject to change
without notice.
For latest revision of the
I/O Manuals, go to
www.sorinc.com
Table of Contents
System Requirements .............................. 1
Software Installation ............................... 2
Electrical Connection ............................... 3
Connecting to a Device ............................ 4
Calibration ........................................... 6
Other Features and Settings ..................... 11
System Requirements
You will need these minimum system requirements to operate the SOR Calibration
Manager software:
n
Windows XP SP3 or newer operating system.
n Pentium 233-megahertz (MHz) processor or faster (300 MHz is recommended)
n 500MB free hard drive space
n 128MB of system memory (RAM)
n Microsoft ® .NET Framework 2.0 or newer (included in installation)
n CD-ROM or DVD-ROM drive or access to the internet for a downloadable
installation
n
One available USB port, version 1.1 or greater
NOTE: You will need administrative rights to install this software. If you do not have
administrative rights please contact your IT department before you begin.
Windows and Windows Vista are registered trademarks of Microsoft Corporation in the United States and other countries.
General Instructions