SOR 1540 Side Mounted Non-Bleed Pneumatic Level Switch - Manual (Page 3)

Form 1306 (04.13) ©SOR Inc. 3/4
REMOTE MANUAL CHECK
MD OPTION
Installation
 The unit may be mounted using the standard 2” NPT process connection.
 MD Remote Option
(includes plunger, 20 foot cable and two crimps.)
 – Screw plunger to the top of unit.
– Thread the 20’ cable through the hole in plunger and create a 14 inch top loop as
shown below.
– At the bottom of the cable, a second loop can be created as a handle for actuation at
the desired length.
Linear = mm/inches
Drawing 0098626 p.2
CRIMP
REMOTE CABLE
CREATE HANDLE AT DESIRED LENGTH
TOP 14” LOOP
PLUNGER
REMOTE MANUAL CHECK
MD OPTION