SpectraCal C6 User Manual
SpectraCal Computer Accessories
17544 Midvale Ave. N. Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 |
Using the SpectraCal C6 with CalMAN
Quick-Start Guide
1. All the software you need is available for
download from the SpectraCal web site,
No additional drivers
are required for this meter as it uses Windows
standard HID drivers.
2. Install CalMAN
Download and run the CalMAN msi, (Version
4.4 or higher) and Windows Installer will install
CalMAN on your hard drive. The installer will
ask you to accept the license agreement.
3. Plug the C6 into a USB port in your system and install the driver
When you plug in your C6, Windows will pop up a Found New Hardware Wizard.
Once the drivers have been installed by Windows automatically start CalMAN.
4. Start CalMAN and select the C6
On the right side panel, select Meter Settings, click search. When the progress
indicator is finished you can select the meter via the drop down box.
5.
Modes of use.
The C6 comes with an included diffuser for use when taking ambient light
measurements or reading direct light sources such as reading a projector in
direct view mode. In all other modes the diffuser is not used. The C6 has a
tripod mount for use in non-contact mode or can be used in contact mode with
the attached counterweight.