SpectraCal C3 User Manual
SpectraCal Computer Accessories
17544 Midvale Ave. N. Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 |
Using the SpectraCal C3 with CalMAN
Quick-Start Guide
1.
Install the SpectraC
available
for download from the SpectraCal web site,
2.
Plug the C3 into a USB port on your computer
When you plug your C3 into a computer USB
port, Windows will pop up the Found New
Hardware Wizard. The drivers can be
automatically installed by Windows.
Note: The driver identifies the meter as ColorMunki Smile. This is proper.
3.
Install CalMAN
Download and run the CalMAN installer. The Installer will ask you to accept the
license agreement and will install CalMAN on your hard drive.
4.
Start CalMAN and select the C3 meter
On the CalMAN Meter Settings tab, click Find Meter, then click Search
(maintain the All Meters selection in the search dialog). When the progress
indicator finishes, the C3 meter will be the actively selected meter.
5.
Select Meter Mode (Target Display Type)
The C3 is intended for flat panel calibration only. This includes LCD, LED and
plasma displays.