SpectraCal VideoForge 4K - Manual

17544 Midvale Ave. N. Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 | www.spectracal.com
VideoForge 4K Video Generator
Quick Start Guide
Thank you for purchasing an AV Foundry VideoForge 4K Video Generator, the world’s first
affordable 4K SDI video test pattern generator.
Included Parts
You should find the following accessories included with your VideoForge:
- Power Supply; 12vdc 5a, all region 100-220vac
- USB micro Wi-Fi wireless adapter (to be supported in subsequent firmware)
- USB micro memory drive
- HDMI to mini HDMI audio/video output cable
- 4 BNC to 4 mini-connector (1.0/2.3) SDI video output cable
Front Panel USB Ports

Inside the left front access door are two USB ports. The left USB
port contains the supplied USB micro Wi-Fi wireless adapter.
The wireless adapter should be left in the left side USB port. The
wireless adapter is not supported in the original release firmware,
but will be supported as a control interface in subsequent firmware.

The right USB port inside the front access door contains the supplied USB micro memory
drive. The drive contains some example custom images and a pdf copy of this quick start
guide.
Note: Wi-Fi interface control, RS-232 interface control, and front panel menu control will be
supported in subsequent firmware.