SpectraCal Flanders Scientific Monitor - Manual (Page 3)

17544 Midvale Ave. N. Shoreline, WA 98133 USA
Corporate: +1 206 420 7514 | Tech Support: +1 206 457 8949 | www.spectracal.com
9. Also on the AutoCal Setup dialog, under Model and LUT, select your monitor model and the
Color Space LUT slot that you wish to calibrate.
10. Under File Path, select a convenient location for the LUT file that CalMAN will create. Name the
.dat or .cfe file either “user1”, “user2”, or “user3,” depending on whether you wish to load the
LUT into the FSI monitor’s User1, User2, or User3 Color Space slot.
Note: the default location for storing LUT files is: (Documents\SpectraCal\CalMAN xxx\LUTs
11. Under Calibration Type, select the desired type of 3D LUT calibration process.

IR Profile (time based): Creates the best quality display calibration 3D LUT possible in
the selected period of time. You select how much display quality you have time for,
from 30 minutes to maximum display quality (6,000 points max). Uses Intelligent
Resolution Profiling to search out the most nonlinear color space areas and correct
those first.

IR Profile (point based): Creates the best quality display calibration 3D LUT possible with
the selected number of measurement points (1,000 - 10,000 points). Uses Intelligent
Resolution Profiling to search out the most nonlinear color space areas and correct
those first.

Lightning LUT: Creates a display calibration 3D LUT in five minutes or less. Produces a
very high quality result on professional displays with moderate linearity. Displays with
significant nonlinearity may produce marginal results.