Star Headlight & Lantern ST415P Phanto - Manual

PLITSTR346 REV. D 1/10/11
MODEL ST415P*
REMOTE STROBE HEAD INSTALLATION
SAFETY MESSAGE TO INSTALLERS
People’s lives depend on your safe installation of our products. It is important to read,
understand and follow all instructions shipped with our products. In addition, listed below are
some other important safety instructions and precautions you should follow:
• To properly install this warning light: you must have a good understanding of automotive
electrical procedures and systems, along with proficiency in the installation and use of
safety warning equipment.
• When drilling into a vehicle structure, be sure that both sides of the surface are clear of
anything that could be damaged.
• DO NOT install equipment or route wiring or cords in the deployment path of an air bag.
• DO NOT attempt to activate the light while driving in a hazardous situation.
• File this instruction sheet in a safe place and refer to it when maintaining and/or
reinstalling the product.
Failure to follow all safety precautions and instructions may result in property damage, serious
injury, or death to you or others.
The ST415P series strobe heads are designed for use as an auxiliary warning
light system. They will not replace your current headlights or Stop-Tail-Turn
lights, but instead will provide an independent, supplementary warning signal.
3
2
1
ST415P*
ST415P*-W
Please Note: These instructions are provided as a general guideline only. Specific
mounting, wiring, and/or weather-sealing may be necessary and are the sole
responsibility of the installer. The manufacturer assumes no responsibility for the
integrity of the installation for this or any of its products.
These are HIGH INTENSITY strobes. DO
NOT stare directly into the light while it is
on, as momentary blindness and/or
permanent eye damage may occur.