Star Headlight & Lantern TDDL15 Series High Intensity - Manual (Page 8)

-6-
TDDL15-42TA
(Chevy Tahoe Mounting)
1. The TD92-7KTA is included with the TDDL15-42TA.
It includes (2) lightstick mounting brackets and
(4) 1/4” x 3/4” self-drilling hex head screws.
(Mounting CONT’D)
3. Locate the third upholstery “push-it”
mounting hole from end.
4. Place the large, oblong hole in the
bracket over the upholstery
mounting hole, with the wider edge
of the bracket facing towards the
rear of the vehicle.
5. Secure the bracket with two ¼” x
¾” self-drilling hex head screws
through the two smaller holes in the
corners of the bracket.
2. These brackets are designed to
mount to the roof framework at the
rear of the vehicle. Pull down the
overhead plastic trim from the rear
of the Chevy Tahoe.
TD92-7KTA
TAHOE BRACKET KIT