Starrett 2900 Capacitive Indicator - Manual (Page 6)

6
Setting the PRESET Function*
1. To set a value, press and hold the ZERO/ABS
button until the ABS icon appears in the upper
right corner of the LCD (right). The values can
be SET to: +/-99.99999" or +/-9999.999mm.
2. Press the SHIFT/SET followed by the PRESET
button. The SET (S) and PRESET (P) icons will
appear in the upper left corner of the LCD. The
PRESET icon will be flashing (middle right).
3. To move from the PRESET icon to a digit,
press the SHIFT/SET button. A flashing digit
indicates that it is ready to be SET (lower right).
Press the PRESET button to increment the
value. To set, press the SHIFT/SET button.
4. To move to the next digit press the SHIFT/SET
button and repeat step 3. Repeat steps 2 and
3 until all the digits are SET.
5. To set a negative value, press PRESET when
the plus/minus sign icon is flashing.
6. To exit the PRESET function, press the PRESET button when the PRESET icon is
flashing. The SET value will remain displayed.
7. Press and hold the ZERO/ABS button to return to the active measuring mode.
Press Then
to enter Preset Mode
to increment the value of the digit or the plus/minus sign
Press
Press
to cycle from digit to digit and back to preset
Setting MIN/MAX Limits (Go/No Go Function)*
1. Select the units to be displayed.
2. Press the SHIFT/SET button. The SET icon will
appear in the upper left (right).
3. Press the LIMITS button. The MIN LIMIT icon
will appear in the upper middle of the display.
4. Press the SHIFT/SET button. The LIMIT icon
will flash on/off.
5. Adjust the spindle to the desired minimum value.
* Available on 2900-5 Advanced Features Models
2900 Capacitive Series Indicator User Manual