Starrett 679 Video Inspection Scope - Manual

Starrett Inspection Scope
Instructions for the Starrett 679 Series Video Inspection Scope
General Safety Instructions
Introduction
Specifications
The new Starrett Inspection Scope is ideal for remote inspection of areas inaccessible to the naked eye. It includes a digital video
camera with three light intensity settings attached to either a 3' or 6' flexible, water resistant shaft. A full color image sensor and
dual solid state LEDs provide imaging and illumination. The 2.5" full color LCD screen displays live video from the digital camera.
Applications include viewing critical but hard-to-see areas during machining operations, inspection of internal parts of engines and
machinery, A/C systems, and interior structures of walls.The Inspection Scope comes with a mirror that allows viewing 90° to the
axis of the shaft, a magnet that can pick up about a quarter pound, and a rugged, protective case.
Shaft Length: 3' or 6'
Distal Top Diameter: 0.42" maximum
with Accessories: 0.46" maximum
Viewing Angle: 55°
Viewing Distance: 0.4" to Infinity
Viewing Monitor: Color 2.5" LCD
Resolution: 320 x 240 pixels
Video Out Port: RCA – NTSC signal
Lighting: Off/Low/Medium/High
Shaft Radius: 2.5" minimum
Power: Four alkaline AA batteries
Battery Life: Four hours (average)
Storage Temperature: -4°F – 158°F
(-20°C – 70°C)
Operating Temperature: 32°F – 113°F
(0°C – 45°C)
Accessories: Mirror and Magnet
Warranty: One year
Battery cover
Housing
LCD
monitor
Dimming
Switch
Shaft
Video
out port