StorCase Technology DE300i-S - Manual (Page 32)

Kingston Technology Company DE300i-S User's Guide - Rev. B00
26 Appendix C - Attaching the On/Off Key
The following information will provide the necessary steps to attach the ON/OFF key to the
key/lock mechanism so that it is non-removable. This configuration is preferred for some
applications and is reversible.
1. Make certain power is off to the receiving frame.
Locate the rectangular shaped key/lock
mechanism access hole on the inside of the
receiving frame. Note that the pawl is in an
upright position.
Insert the key into the key/lock.
2. Rotate the key 90 degrees counterclockwise so
that the pawl is visible in the access hole as
shown in the figure at left.
3. Using the provided adjustment tool, unscrew
and remove the pawl from the access hole.
4. Rotate the key 180 degrees clockwise.
5. Reinstall the pawl into the access hole with the
adjustment tool..
Your key is now attached to the key/lock
mechanism.
Figure C-1: Attaching the On/Off Key
Appendix C - Attaching the On/Off Key
Pawl
Access
Hole
Key/Lock
90
Degrees
180
Degrees
0523