Figure 6: attaching the dx1/200-swc160/rh – StorCase Technology DX1/200-SW160/RH & DX1/200-SWC160/RH Ultra User Manual
Page 5
Advertising
D89-0000-0125 Rev. C00
StorCase Technology, Inc.
DE100/DE200 Ultra160 Hot Swap/Repeater Isolator Board
Figure 5: DE100i-SWC160 (or DE200i-SWC160, S20A102, S20A108)
Receiving Frame Motherboard J3 Jumpers
Figure 6: Attaching the DX1/200-SWC160/RH
Remove Jumpers on J3 Pins 7 & 8 and
9 & 10 Before Installing Isolator Board
DE100 or DE200
(Ultra160 Only)
Receiving Frame
Motherboard
456b
J3
J4
J4 Jumper
(Factory Installed
Do Not Remove)
Receiving Frame
Stand-Offs
(2 per Isolator Board)
I/O Connector
#6-32 x 1/4 Phillips
Pan Head Screws
0452b
DX1/200-SWC160/RH
Isolator Board
DE100 or DE200
(Ultra160 Only)
Receiving Frame
Motherboard
Advertising