Typical firewire configurations, Typical single host configurations – StorCase Technology DS321 User Manual
Page 20
12
Installation
StorCase Technology, Inc.
DS321 User's Guide - Rev. B00
Typical FireWire Configurations
NOTES:
The installation, configuration, and use of the StorCase Data Silo DS321
FireWire 800-to-IDE chassis requires a certain level of expertise and experi-
ence on the part of the user/integrator. Since there are many configuration
options and variables (ie. host platforms, applications, etc), only general/typical
configuration guidelines will be discussed in this User's Guide.
One (1) 6' FireWire 800-to-FireWire 800 cable, one (1) 20" FireWire 800-to-
FireWire 800 cable, and one (1) 6' FireWire 800-to-FireWire 400 cable are
provided with each DS321 chassis.
Typical Single Host Configurations
NOTE:
Depending on configuration, additional FireWire 800 cabling may be required.
Contact StorCase for further ordering information.
Figure 8: Typical Single Host Connection to One Data Silo
20 FireWire 800 Cable
(Provided)
FireWire Host
321_05
6 FireWire 800 Cable
(Provided)