StorCase Technology 9-Bay 4U SCSI Ultra160 - Manual (Page 30)

InfoStation User Interface 21
InfoStation User's Guide - Rev. B01 StorCase Technology, Inc.
Enclosure ID Set-Up
The following steps show how to view and change the InfoStation Enclosure ID.
NOTE: Press CANCEL at anytime to exit the menu system and return to the Default Display.
The menu system will automatically cancel after 15 seconds of User inactivity.
1. Press ENTER at the Default Display so that
display = Status.
2. Press DOWN until display = Setup.
3. Press ENTER so that display = Alarm.
4. Press DOWN until display = Enc. ID.
5. Press ENTER so that display = Enc. ID=x.
This is the current enclosure ID.
6. Press UP or DOWN to change the enclosure ID
number.
7. Press ENTER to accept the change.